9.
TROUBLESHOOTING
Sound skips or
is
noisy. Compact disc
is
dirty. Clean the compact disc with a soft
~oth
Compact disc
is
heavily I Replace with a compact disc with
no
scratched or warped. I scratches.
.
Sou~~
bad~irectlY
aft~tlJ\l~ter
drop~ets-rT1ay
form-~
Let dry"for about 1 hour with the
power
is
turned on. I on the internal lens when power
on.
the car
is
parked
in
a
humid place.
Problem
Power does not turn on.
(No sound
is
produced.)
Compact disc cannot
be
loaded.
Nothing happens when
buttons are pressed.
Display
is
not accurate.
Cause
Fuse
is
blown.
I
~nco~r~ct
:;rin-g-.--··
1-------
..
I Another compact disc
is
already loaded.
Microprocessor has
malfunctioned due to
noise, etc.
)
,~
DCP or source unit
I connectors are dirty.
I
- I
Solution
Replace with a fuse of the same
amperage.
If
the fuse blows again,
consult your store of purchase.
Consult your store of purchase.
Eject the compact disc before loading
the new one.
Turn off the power, then press the
DCP Release button
IT]
and remove
the DCP.
Press the reset button for about 2
seconds with a thin rod.
Reset button
Wipe the dirt off with a soft cloth
moistened with cleaning alcohol.
08325
15
To Next Page
Loading...
Need help?
General
