Radio Mode Operations
FM
Reception
For enhanced
FM
performance the MfiGI-T(Jl'IE@
tuner includes signal actuated stereo control and
Multipath noise reduction circuits.
Listening to the Radio
1)
Press the FUNC button
rn
to select the radio
mode, then the radio will be
on.
2)
To
select a preset band, press the BAND but-
ton
@],
then select one of the preset bands
such as FM1, FM2, FM3, or AM. Every time
the BAND button
[1] is pressed, the display
will change as:
F1
(FM1)
-+
F2
(FM2)
-+
F3 (FM3)
-+
AM
-+
F1
(FM1)
3)
Press the SRCH Left/Right button
rn,
then
the station at which there is a broadcast will
be selected (Seek selection).
Mute
Use this function to turn off the sound immedi-
ately.
Press the MUTE button
II§].
The sound turns off
and "MUTE" appears on the display. Press the
MUTE button again to cancel the mute mode.
Manual Tuning
1) Press the BAND button [1], then select FM1,
FM2, FM3 or AM.
2)
Press and hold the BAND button
@]
for 1 sec-
ond or longer, then the display will show
"MANU", which means that a manual selec-
tion function is on.
3)
Press the SRCH Left/Right button
rn
and
select the right station.
Seek Tuning
1) Press the BAND button [1], then select FM1,
FM2, FM3 or AM.
2)
If
the "MANU" on the display is on, press and
hold the BAND button
@]
for 1 second or
longer. When the "MANU" display is off, the
Seek Selection function is on.
3)
Press the SRCH Left/Right button
rn,
then
when
it
selects the station
in
which there is a
broadcast,
it
automatically stops.
12
08325
Preset Memory Function
Preset Memory Function can store up to 24 sta-
tions: six stations for each of FM1, FM2, FM3
and AM.
Note:
• When the present memory function is used, all the
content
of
the memory will
be
erased.
Manual
memory
function
1) Press the BAND button [1], and select the
band you want to store
in
the memory.
2) Press the SRCH Left/Right button
[gJ
then
select the station you want to store in the
memory.
3)
Press and hold the Preset button
[g]
for 2
seconds or longer, then the station will
be
stored
in
the memory.
Auto
store
function
(Automatic
Station
Store)
1)
Press the BAND button [1], then select the
band you want to store
in
the memory.
2)
Press and hold the AS button
ffiJ
for 2 sec-
onds or longer, then the station at which the
reception is the strongest will be automatical-
ly stored
in
the memory.
Note:
• When the number
of
stations stored is less than six,
the previous content
of
the memory for each direct
button will
be
retained.
Preset Scanning (Preset Station Scan)
When the PS button
ffiJ
is pressed, the preset
memory numbers flash and the stations are
tuned
in
for 7 seconds each
in
the order in which
they were stored. Press the PS button
ffiJ
again
to cancel the preset scanning mode.
Instant Station Recall (ISR)
With this function, a specific radio station can
be
recalled from any mode.
ISR
memory
1)
Press the FUNC button
~,
then select the
radio mode.
2)
Select the radio station which you want to
store
in
the memory.
3)
Press and hold the ISR button
[1]
for 2 sec-
onds or longer.
To Next Page
Loading...
Need help?
General
