Operation Common
to
CD and USB Drive
Pausing play
1.
Press the [
~II]
button to pause play. "PAUSE"
appears
in
the display.
2.
To
resume track play, press the
[~II]
button
again.
Displaying
CD
titles
This unit can display title data for MP3IWMA.
1.
Press the
[0]
button to display the title.
2.
Each time you press the
[T]
button, the title
display changes
in
the following order:
• MP3IWMA
disc
Folder
~
Track
~
Album
TAG
~
Artist
TAG
~
Title
TAG
~
Folder
...
Notes:
• If MP3IWMA disc is not input TAG, "NO TAG" ap-
pears
in
the display.
• For MP3, supports 103 Tags V2.4/2.3/2.2/1.1 /1.0.
•
Tag
displays give priority to V2.4/2.3/2.2.
•
In
the case of album Tags for WMA, the information
written into the extension header is displayed.
• Only ASCII characters can be displayed
in
Tags.
Display selection
1.
You
can
choose the display type for MP3IWMA
by pressing the [D] button.
To
select the next type, press the [D] button
again.
The arrangement is shown below.
1
.....
2Q_=181
(Track No., play time)
\11
1F7(')~mS51
(Folder No., track No.)
\11
IEII_PEERl
(Folder)
*Refer to "Title Display Mode"
\11
18 DB365USB
Title
display
mode
1.
There are 5types of display for the Title Display
mode.
2.
To
select the next type, press the
[T]
button for
less than 1 second.
The arrangement
is
shown below.
After 2 seconds
C[FOLDER]
- [FolderTitle]
C
[TRACK]
- [Track
Title]
(ALBUM)
-----.
(Album
Tag)
CC(ARTIST
)
-----.
(ArtistTag )
(
TITLE)
-----.
(Title
Tag)
3.
The displayed item can
be
scrolled by pressing
the [T] button for more than 1 second.
4.
If
a MP3IWMA file does not support for ID3
TAG, the display will show "NO TAG"
5.
If
a MP3IWMAfile encode with ID3
TAG
header
but not consist of any
TAG
information, the
display will show nothing.
Notes:
• The folder name will be displayed as "ROOT" which
the file allocates
in
the root folder.
• The MP3 player decodes each file
103
TAG ver 2
by default, if
103
TAG ver 2 is unavailable,
103
TAG
ver 1 will be decoded.
• UNICODE
103
(Chinese, Japanese and etc) is not
supported.
Selecting a
track
• Track-up
1.
Press the [
~~I]
button to move to the begin-
ning of the next track.
2.
Each time the [
~~I
] button
is
pressed, playback
proceeds to another track
in
the advancing
direction.
• Track-down
1.
Press the
[I~~]
button to move the beginning
of the
cu
rrent track.
2.
Press the
[I~~]
button twice to move to the
beginning of the previous track.