DCP case
DCP
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
• The DCP can
easily
be
damaged
by
impact.
After
removing it, be careful
not
to
drop
it
or
SUbject
it
to
strong
shocks.
• If
the
FLIP DOWN PANEL
is
kept open,
the
DCP may
drop
due
to
vibration
of
the
car.
This
may
result
in
damage
to
the
DCP.
So
close
the
FLIP DOWN PANEL
or
remove
the
DCP and
store
in
the
case.
• Theconnectorconnecting the main
unit
and
the
DCP
is
an extremely
important
part. Be
careful
not
to
damage
it
by
pressing
on
it
with
fingernails, pens, screwdrivers, etc.
Storing
the
DCP
in
the
DCP case
Hold the
DCP,
in
the orientation as shown
in
the
figure below, and put it into the supplied DCP
case. (Ensure the DCP is
in
the correct orienta-
tion.)
3.
Pull the DCP toward
you
and remove
it.
* The DCP is unlocked.
Attaching
the
DCP
1.
Insert the right side of the DCP into the main
unit.
2.
Insert the left side of the DCP to attach into
the main unit.
Removing
the
DCP
1.
Press the [SRC] button for 1 second or longer
to switch off the power.
2.
Press
in
the [RELEASE] button.
~
[RELEASE]
button
1(1
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in
the
DCP
(Detachable Control Panel) case
to
prevent scratches.
We
recommend taking the DCP with you when
leaving the
car.
8 DB365USB
To Next Page
Loading...
Need help?
General
