Specifications
CD
Decode Format
Sampling rate
(kHz)
MPEG
1,
2 and 2.5 - Layer 3
MPEG-1 :
32,44.1,48
MPEG-2 : 16, 22.05, 24
MPEG-2.5 :
11
.025,
44.1
Audio
Maximum Power Output: 200 W (50 W X 4 ch)
Bass Control Action (100 Hz): ±14 dB
Treble Control Action (10 kHz): ±14 dB
Line Output (with
AIC
1 kHz, 10 kQ): 1.8 V
USB
USB
1.1
and 2.0 compatible with a maximum
transfer rates of up to 12Mbps. (Full speed)
178mm
~[
rL-------"I
General
Power Supply Voltage:
14.4 V DC (10.8 V to 15.6 V allowable), nega-
tive ground
Current Consumption: Less than 15 A
Speaker Impedance: 4 Q
(4
Q to 8 Q allowable)
Weight: 2.42 lb.
(1.1
kg)
Dimensions:
178 mm Width X 50 mm Height X 152 mm
Depth
22.05 -
44.1
MPEG
1,
2 and 2.5 - Layer 3
48,64,80,96,128,160,192
ISO 9660 Level
1,
2,
Romeo
and Joliet
MPEG-1 : 32 - 320
MPEG-2 : 8 - 160
MPEG-2.5 : 8 - 160
VBR
ISO 9660 Level
1,
2,
Romeo
and Joliet
Sampling rate
(kHz)
Decode Format
CD-ROM
Format
Bit-rate (kbps)
Bit-rate (kbps)
CD-ROM
Format
Common
in
MP3IWMA Disc and
USB drive
Folder Level Limit : 8 Level
Sampling rate
(kHz)
Bit-rate (kbps)
Sampling rate
(kHz)
Bit-rate (kbps)
Folder Support
File Support
Folder Name
File Name
MPEG-1 :
32,44.1,48
MPEG-2 : 16, 22.05, 24
MPEG-2.5 :
8,
11.025, 12
MPEG-1 : 32 - 320
MPEG-2 : 8 - 160
MPEG-2.5 : 8 - 160
VBR
8,
11.025, 16, 22.05, 32,
44.1
48,64,80,96,128,160,192
: 255
: 255
: Maximum 28 bytes
: Maximum 28 bytes
Notes:
• Specifications comply with JEITA Standards.
• Specifications and design are subject to change
without notice for further improvement.
• Please make sure when connecting external power
amplifier, that you properly, to the car chassis,
ground the amplifier.
• If this is not done, severe damage to the source
unit may happen.
Power Output:
19 W RMS x 4 Channels at 4 Q and s
10/0
THD+N
Signal
to
Noise Ratio:
81
dBA (reference: 1 W into 4Q)
DB365USB 25