* The OCP
is
unlocked
3.
Remove the
DCP.
DCP case
DCP
connector
A CAUTION
• The DCP can easily be damaged
by
shocks. After removing it, be careful
not
to
drop
it
or
subject
it
to strong shocks.
• When the Release
button
is pressed and
the DCP
is
unlocked, the car's vibrations
may cause
it
to
fall.
To
prevent damage
to
the
DCP,
always
store
it
in its case after
detaching it. (See figure below.)
• The
connector
connecting the main unit
and the DCP
is
an extremely important
part. Be careful
not
to damage
it
by
pressing
on
it
with fingernails, pens,
screwdrivers, etc.
Storing the DCP
in
the DCP Case
Hold the
DCP,
in the orientation
as
shown
in
the
figure below, and put it into the supplied DCP
case. (Ensure the DCP is
in
the correct
orientation.)
Z
[RELEASE]
button
~~
Attaching
the DCP
1.
Insert the right side of the
OCP
into the main
unit.
2.
Insert the left side
of
the DCP into the main
unit.
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in
the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1.
Press the [SRC] button for 1 second or
longer to switch off the power.
2.
Press in the [RELEASE] button.
I
Note:
•
If
the
DC?
is
dirty, wipe
off
the dirt with a soft, dry
cloth only.
10
DB455MC
To Next Page
Loading...
