Basic
Operations
2.
Press the SEARCH button
[!lJ
and select from
"TREB
~GAIN
~"
..
"TREB
~F
12K~"
..
"TREB
~GAIN
~".
3.
Turn the Rotary knob
[lID
clockwise
or
coun-
terclockwise as needed and adjust the gain
and the F (center frequency).
TRES
GAIN:
-6
to 6 (The factory default
setting is "0")
TRES F :
8KHz/12KHz
(The
Factory
default setting is "12K")
4. When the adjustment is complete, press A-M
button
[Ig)
several times until the function mode
is reached.
Adjusting
the balance
1.
Press A-M button
[Ig)
and select
"BALANCE".
2.
Turning the Rotary knob
[IID
clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
*The factory default setting
is
"0". (Adjustment
range: L
13 to R13)
3.
When the adjustment is complete, press A-M
button
[Ig)
several times until the function mode
is reached.
Adjusting
the fader
1. Press A-M button
[Ig)
and select "FADER".
2.
Turning the Rotary knob
[IID
clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
*The factory default setting is
"0".
(Adjustment
range:
F12 to R12)
3.
When the adjustment is complete, press A-M
button
[lg]
several times until the function mode
is reached.
Adjusting
the Beat EQ
1.
Press BEQ button [I] and select the Beat EQ
mode
(1
to 3) to adjust.
2.
Press
A-M
button
[lg]
and
select
"BASS
BOOST
or
IMPACT
or
EXCITE".
3. Turning the Rotary knob
[IID
clockwise adjusts
in
the + direction; turning it counterclockwise
adjusts in the - direction.
*When BASS BOOST
is
selected,
you
can ad-
just the bass
in
the range
of
-3
to 3.
*
When
IMPACT
and EXCITE
is
selected,
you
can
adjust
the
bass
and
treble
in
the
range
of
-3
to
3.
12
DXZ815MP
4.
When the adjustment is complete, press A-M
button
[Ig)
several times until the function mode
is reached.
Turning
on/off
the
loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect.
1.
Press and hold LOUD button [g] for 1 second
or
longerto turn on the loudness effect. When
the loudness effect is turned on, "LO" lights
in
the display.
2. Press and hold LOUD button
[g] for 1 second
or longer to turn off the loudness effect. "LO"
goes off in the display.
Note:
• When using a sold separately digital sound pro-
cessor (DPH91
0),
a feature called auto loudness
is selected. This function is different from the loud-
ness effect. For further details on the auto loud-
ness feature, refer
to
the subsection "Output ad-
justment
of
auto
loudness,
subwoofer
and
playback
band"
in section "DSP Operations".
To Next Page
Loading...
