Clarion DXZZ75MP User Manual

Basic Operations
Sound Adjustment
You can adjust a sound effect or tone quality to
your preference.
To change soundsetting
1. Press the [J'] button to switch to the
sound adjustment selection display.
*The factory default sound setting is "Z-
EHCR".
2. Then press the [~] or [~] button to
select the sound adjustment mode.
Each time you press the [
......... ] or [~]
button, the sound adjustment mode.
changes as following order:
"Z-EHCR"
+-+ "BASStl +-+ "TREBLE" +-+
"BALANCE" +-+ "FADER" +-+ "REAR/S-W"
+-+ "S-W VOL" +-+ "HPF"
The sound adjust mode will be display for
2 seconds before showing the sound
setting.
3. Press the [A] or [T] button to adjust the
selected audio mode.
* In the case of display blinking "ENT", you
can press the [~NI~ ] button to adjust the
setting value.
4. After completing settings, press the [J']
button to return to the previous mode.
• Setting the Z-Enhancer
This unit are provided with 3 types of sound
tone effects stored
in memory.
Select the one you prefer.
*The factory default setting is "OFF".
2-1. Select "Z-EHCR".
3-1. Each time you press the
[A] or [T]
button, the tone effect changes in the
following order:
"EXCITE"
+-+ "IMPACT" +-+ "B-BOOST" +-+
"OFF"
EXCITE : bass and treble emphasized
mid deemphasized
IMPACT' : bass and treble emphasized
B-BOOST : bass emphasized
OFF : no sound effect
When "EXCITE" is set:
3-2. Press the [~NI~] button.
3-3. Press the
[A] or [T] button to adjust the
bass and treble
in the range of +3 to -3.
*The factory default setting is "0".
3-4. Press the [~NI~] button to return to previous
mode.
When "IMPACT" is set:
3-2. Press the [~J~] button.
3-3. Press the [A] or [T] button to adjust the
bass and treble
in the range of +3 to -3.
*The factory default setting is "0".
3-4. Press the [~N~] button to return to previous
mode.
When "B-BOOST" is set:
3-2. Press the [~N~] button.
3-3. Press the [A] or [T] button to adjust the
bass
in the range of +3 to -3.
*The factory default setting is "0".
3-4. Press the [~J~] button to return to previous
mode.
• Adjusting the bass
This adjustment can be performed only when
the Z-Enhancer is set to "OFF".
2-1. Select "BASS".
3-1. Press the
[A] or [T] button to adjust the
bass.
*The factory default setting is "0".
(Adjustment range:
+8 to -8)
• Adjusting the treble
This adjustment can be performed only when
the Z-Enhancer is set to "OFF".
2-1. Select "TREBLE".
3-1. Press the
[A] or [T] button to adjust the
treble.
*The factory default setting is "0".
(Adjustment range:
+7 to -7)
• Adjusting the balance
2-1. Select "BALANCE".
3-1. Press the
[A] or [T] button to adjust the
balance of the right and left speakers.
*The factory default setting is "CENTER"
(center). (Adjustment range: RIGHT12 to
LEFT12 (right 12 to left 12))
DXZ275MP/DXZ375MP 11

Clarion DXZZ75MP Specifications

General

Brand	Clarion
Model	DXZZ75MP
Category	Car Receiver
Language	English