EasyManuals Logo

Clarion DXZZ75MP User Manual

Clarion DXZZ75MP
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
8. IN CASE OF DIFFICULTY
File system is not correct. Use IS09660 level
1,
2 or JOLIET or Romeo file
system.
Water droplets may form
on
Let dry for about 1 hour with the power on.
the internal lens when the car
is
parked
in
a humidplace.
Use IS09660 level
1,
2 or JOLIET or Romeo file
system.
Clean the compact disc with a soft cloth.
Write MP3IWMA files onto the disc properly.
Use MP3IWMA files encoded properly.
1.
Turn down sound volume. Function can also be
restored by turning the power off and
on
again.
(Speaker volume
is
reduced automatically when
the speaker protection circuit operates).
2.
If
the sound
is
muted again, consult our service
department.
Use MP3IWMA files encoded properly.
Replace with a compact disc with no scratches.
Wipe the dirt off with a soft cloth moistened with
cleaning alcohol.
1.
Turn the unit off.
2.
Remove all wires attached to the power antenna
lead. Check each wire for a possible short to
ground using
an
ohm meter.
3.
Turn the unit back on.
4.
Reconnect each amplifier remote wire to the power
antenna lead one by one. If the amplifiers turn off
before all wires are attached, use
an
external relay
to provide remote-on voltage (excessive current
required).
Consult your store of purchase.
Turn off the power, then press
~~~~~~~\.R~eset
button
the
[RELEASE]
button and
~
remove the DCP.
Press the reset button for about
2 seconds with a thin rod.
Replace with a fuse of the same amperage. If the fuse
blows again, consult your store of purchase.
Compact disc
is
heavily
scratched or warped.
Compact disc
is
dirty.
MP3IWMA files are not
encoded properly.
File system
is
not correct.
DCP or main unit connectors
are dirty.
Files are not recognized as
an
MP3IWMA file.
MP3IWMA files are absent
in
a disc.
Incorrect wiring.
The microprocessor has
malfunctioned due to noise,
etc.
The speaker protection circuit
is operating.
Power antenna lead is
shorted to ground or
excessive current
is
required
for remote-on the amplifiers
or power antenna. .
Sound is cut or
skipped.
Noise is
generated or
noise
is
mixed
with sound.
Power does not
turn on.
(No sound is
produced.)
No sound output
when operating
the unit with
amplifiers or
power antenna
attached.
28 DXZ275MP
/DXZ375MP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarion DXZZ75MP and is the answer not in the manual?

Clarion DXZZ75MP Specifications

General IconGeneral
BrandClarion
ModelDXZZ75MP
CategoryCar Receiver
LanguageEnglish

Related product manuals