Radio Operations
Listening to the radio
1.
Press the [SRC] button and select the radio
mode. The frequency appears
in
the display.
2.
Press the [BND} button and select the radio
band. Each time the button is pressed, the
radio reception band changes
in
the
following order:
F1
(FM1)
~
F2 (FM2)
~
F3 (FM3)
~
AM
~
F1
(FM1)...
3.
Pressthe[l<llIIIII<llIII]or[~]buttontotuneinthe
desired station.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
1.
Press the [BND] button and select the
desired band (FM or AM).
*If "MANU" is lit
in
the display, press and hold
the [BND] button for 1 second or longer.
"MANU"
in
the display goes off and seek
tuning is now available.
2.
Press the
[~
.....
] or
[~~]
button to
automatically seek a station.
When the
[~]
button is pressed, the station
is
sought
in
the direction of higher
frequencies; if the
[~
.....
] button is pressed,
the station is sought
in
the direction of lower
frequencies.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are
in
the step tuning mode, the
frequency changes one step at a time.
In
the
quick tuning mode, you can quickly tune the
desired frequency.
1.
Press the [BND] button and select the
desired band (FM or AM).
* If "MANU" is not lit
in
the display, press and
hold the [BND] button for 1
sec;ond
or longer.
"MANU" is lit
in
the display and manual tuning
is now available.
2.
Tune into a station.
• Quick tuning
Press and hold the
[~
.....
] or
[~]
button for 1
second or longer to tune
in
a station.
• Step tuning
Press the
[1<llIIIII<llIII]
or
[~]
button to manually tune
in
a station.
Recalling a presetstation
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations
in
memory. Pressing the corresponding
[DIRECT] button or the
[~]
/
[T]
button recalls
the stored radio frequency automatically.
1.
Press the [BND] button and select the
desired band (FM or AM).
2.
Press the corresponding [DIRECT] button or
the
[~]
/
[T]
button to recall the stored
station.
Note:
• Press
and
hold one
of
the [DIRECT] buttons for 2
seconds
or
longer to store that station into preset
memory.
Manual memory
1.
Select the desired station with seek tuning or
manual tuning.
2.
Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto
store
Auto store is a function for storing up to 6
stations that are automatically tuned
in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1.
Press the [BND] button and select the
desired band (FM or AM).
2.
Press and hold the
[~NI~]
button for 2 seconds
or longer. The stations with good reception
are stored automatically to the preset
channels.
DXZ275MP
jDXZ375MP
13
To Next Page
Loading...
Need help?
General
