Operations Common to Each Mode
Mode
Number
of
titles
CD mode
50 titles
TV mode
20 titles
Radio mode
30 titles
Entering titles
Titles up to 8 characters long can be stored
in
memory and displayed for CD, CD changer,
Radio stations and TV stations. The number of
titles that can be entered for each mode are as
follows.
AUXfunction
This system has an external input jack on the
front panel so you can listen to sounds and
music from external devices connected to this
unit.
• Selecting AUX
IN
sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
*The factory default setting is "MID".
1.
Press and hold the [DISP] button for 1
second or longer.
2.
Select "AUX SENS".
3. Press the [
..
] or
[T]
button to select
"LOW", "MID" or "HIGH".
Clearing titles
1.
Select and
playa
CD
in
the CD changer or
tune
in
to a TV station or Radio for which you
want to clear the title.
2.
Press and hold the
[0]
button for 1 second or
longer to switch to the adjustment selection
display.
3. Press the
[~~]
or
[~~]
button to select
"TITLE IN".
4. Press the
[~J~]
button.
The display switches to the title input display.
5.
Press and hold the [BND] button for 1
second or longer.
All
characters
in
the title disappear.
6.
Press and hold the
[~J~]
button for 2 seconds
or longer to store the setting.
100 titles
Number
of
titles
DCZ625 connected
CD
changer mode
1.
Press the [SRC] button to select the mode
you want to enter a title (Radio, CD, CD
changer or TV).
2.
Select and
playa
CD
in
the CD changer or
tune
in
to a TV station or Radio for which you
want to enter the title.
3. Press and hold the [0] button for 1 second or
longer to switch to the adjustment selection
display.
4. Press the
[1<lllIII~]
or
[~~]
button to select
"TITLE IN".
5. Press the
[~NI~]
button.
The display switches to the title input display.
6. Press the
[~~]
or
[~~]
button to move the
cursor.
7.
Press the [BND] button to select a character
type. Each time you press the [BND] button,
the character type changes
in
the following
order:
Capital letters Numbers
...
Symbols ...
Capital letters .
8.
Press the [
..
] or
[T]
button to select the
desired character.
9.
Repeat steps 6 to 8 to enter up to 8
characters for the title.
1a.Press and hold the
[~J~]
button for 2 seconds
or longer to store the title into memory.
DXZ275MP
/DXZ375MP
21
To Next Page
Loading...
Need help?
General
