Clarion M255 User Manual

9
English
M255
Basic Operations
Turning the MAGNA BASS EX on/off
The MAGNA BASS EX emphasizes deep bass
to provide you with a dynamic sound.
∗ The factory default setting is off.
Press and hold the
[
A-M
]
button for 2 seconds or
longer to turn the MAGNA BASS EX and “M-B EX”
in the display lights on or off.
Adjusting the balance
1. Press the
[
A-M
]
button and select “BAL”.
2. Turning the
[
ROTARY
]
knob clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
∗ The factory default setting is “0”. (Adjustment
range: L13 to R13)
Adjusting the fader
1. Press the
[
A-M
]
button and select “FAD”.
2. Turning the
[
ROTARY
]
knob clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers. The line-level outputs
are used in conjunction with the rear speaker
settings.
∗ The factory default setting is “0”. (Adjustment
range: F12 to R12)
Turning the screen saver function on
or off
This unit is provided with the screen saver func-
tion. You can turn on or off this function.
If the button operation is performed with the screen
saver function on, the operation display corre-
sponding to the button operation is shown for
about 30 seconds and the display returns to the
screen saver display.
∗ The factory default setting is off.
Press the
[
SS
]
button while keeping the
[
BND
]
button pressed, to turn the screen saver function
on or off.
Switching the clock display
Press and hold the
[
BND
]
button, and then press
the
[
DISP
]
button to switch between the opera-
tion mode and the clock display.
Setting the clock
1. Press and hold the
[
BND
]
button, and then
press the
[
DISP
]
button to display the clock dis-
play.
2. Press and hold the
[
BND
]
button, and then
press the
[
DISP
]
button for 2 seconds or longer.
3. Pre
ss the [ ] or [ ] button to toggle HOUR
and MINUTE selection. Then turn the
[
RO-
TARY
]
knob clockwise to increase hour /
minute or counterclockwise to decrease hour /
minute.
4. Press the
[
BND
]
button, then clock is set.
Note:
• If you select another operation mode while you are
setting the clock, the clock setting operation will be
canceled.
• If you remove the vehicle's battery for a check or
repair, the clock will reset, so you must set it again.

Clarion M255 Specifications

General

Brand	Clarion
Model	M255
Category	Marine Audio
Language	English