Listening
to
a
disc
already loaded
in
the
unit
Press the [SRC] button to select the CD/MP31
WMA
mode. "CD/MP3" will be displayed.
When the unit enters CD/MP3IWMA mode, play
starts automatically.
Radio
~
CDIMP3IWMA
~
AUX
~
Radio
...
Note:
• The default display
is
Main
Display (Track
No.1
Play
Time).
• Do
not
try
to
put
your
hand
or
fingers
in
the
disc
insertion slot. Also never insertforeign
objects
into
the
slot.
• Do
not
insert
discs
where adhesive comes
out
from
cellophane
tape
or
a rental
CD
label,
or
discs
with marks where cellophane
tape
or
rental
CD
labels were removed. It
may be
impossible
to
extract these
discs
from
the
unit
and
they
may cause
the
unit
to
break down.
• This
unit
is
designed
for
play
of
12cm com-
pact
disc
only. Do
not
attempt
to
use Scm
CD
singles in this unit, either with
or
without
an adaptor, as damage
to
the
player and/or
disc
can occur. Such damage
will
not
be
covered
by
the
warranty on
this
product.
Backup eject
function
Pressing the [
~
] button ejects the disc even if
the power to the unit was not turned on. Remove
the disc after it is ejected.
Notes:
•
If
you
force a
CD
into before auto reloading, this
can
damage the
CD.
•
If
a
CD
(12
em)
is
left
in
the ejected position for
15
seconds,
the
CD
is
automatically reloaded (Auto
reload).
m
::J
•••
~!mmI!I]
•••
1
~.
~
~g
Set
to
CD
Set
to
MP3IWMA
Mixed with CD-DA
Play
CO-
Play MP3IWMA
and
MP3IWMA
DA
type tracks
CD-DA type track
Play
CO-
Play CD-DA
only
DA
MP3IWMA type
Play
MP31
Play MP3IWMA
track only
WMA
5.
CD-DA/MP31WMAselection function can only
be performed in CD/MP3IWMA mode.
It
will
only activate after re-insert CD. For example,
current setting is CD-DA type. Press [BND]
button for more than 1 second to set MP3IWMA
type. User has to eject CD and re-insert again
as to play MP3IWMA files.
6.
Types of recording that can be played are as
follows.
CD-DAlMP3IWMA selection on
multi-session
CD
1.
If a multi-session CD which contains CD-DA
and MP3IWMAfiles is being inserted, user can
select either CD-DA or MP3IWMA files to be
played.
2.
Default setting for files to be played on multi-
session CD is CD-DA files.
3. Press the [BND] button for more than 1 second
will toggle between selection of CD-DA and
MP3IWMA files to be played.
4.
When CD-DAtype is selected, display will show
"M-SESS" then "CD". When MP3IWMA type
is selected, display will show
"M-SESS" then
"MP3".
CDIMP3IWMA Mode Operations
• Number
of
files
or
folders
1.
Up to 254 files can be recognized per folder.
Up to 254 files can be played.
2.
Tracks are played
in
the order that they were
recorded onto a disc. (Tracks might not always
be played in the order displayed on the PC.)
3. Some noise may occur depending on the type
of encoder software used while recording.
7. When a Mixed mode CD is loaded and CD is
set, the track to be played first is MP3IWMA
file data and no sound is heard.
Note:
•
When
playing a CCCD (Copy Control
CD),
set the
setting
to
CD
type. When this
is
set
to
MP3IWMA
type,
the
CD
cannot
be
played normally
in
some
cases.
M275 15
To Next Page
Loading...
Need help?
General
