Adjustment Mode
1.
Press and hold the
[0]
button for more than 1
second to switch to the adjustment selection
display.
2.
Press the [
.....
,~]
button to select the "item
name".
"CLOCK"
~
"SCROLL"~"
AUX
SENS"
~
"TEL-SP"
~
"TEL-SW"
*
Some
of the items
will
have
mIl
indicator
light
on,
the
[
~
II
] button must
be
pressed
to
display the setting value.
3.
Turn the [ROTARY] knob to select the "desired
setting
value".
* After completing settings, press
the
[0] button
to
return
to
the
previous
mode.
•
Adjusting
clock
setting
2-1. Select "CLOCK".
3-1. Press the
[~II]
button
3-2. Press [
.....
,
~]
button to toggle HOUR
and MINUTE selection. the HOUR is selected
and blinking by default.
3-3. Turn the [ROTARY] knob clockwise to in-
creases hour/minute or counterclockwise to
decrease hour/minute.
3-4. Press the
[~II]
button to confirm the clock
setting. The display will show "MEMORY"
to indicate the setting has been stored and
return to "CLOCK".
Note:
-
If
you
remove the boat's battery for a check or
repair,
the clock
will
be
reset,
so
user must set
it
again.
• Setting
the
method
for
title
scroll
Set auto scroll function for MP3IWMA title.
*
The
factory default setting
is
"ON".
2-1. Select "SCROLL".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
-ON:
To
scroll automatically.
-OFF:
To
scroll just 1 time when the title was changed.
20 M275
• Selecting AUX
IN
sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected·to this unit are difficult to hear even after
adjusting the volume.
*
The
factory default setting
is
"MID".
2-1. Select "AUX SENS".
3-1. Turn the [ROTARY] knob to select "LOW",
"MID" or "HIGH".
• Setting
the
car speaker
output
for
the
cellular
phone
*
The
factory default setting
is
"RIGHT".
*
To
output
the
telephone calls, set
the
cellular
phone
interrupt
to
ON.
2-1. Select "TEL-SP".
3-1. Turn the [ROTARY] knob to select "RIGHT"
or "LEFT".
Note:
- For telephone interrupt, AUX SENS
is
always
"MID".
-"RIGHT"
Telephone calls can be heard on the front right
speaker connected to this unit.
-"LEFT"
Telephone calls can be heard on the front left
speaker connected to this unit.
• Cellular phone
interrupt
setting
If you connect this unit and your cellular phone
with a separately sold unit, you can listen to your
telephone calls on your boat speakers.
*
The
factory default setting
is
"OFF".
2-1. Select "TEL-SW".
3-1. Turn the [ROTARY] knob to select the set-
ting.
Each time you turn the [ROTARY] knob, the
setting changes
in
the following order:
OFF~ON
~MUTE.
-OFF:
This unit continues normal operation even when
the cellular phone is used.
-ON:
You
can listen to your telephone calls from the
speakers connected to this unit.