Clarion M505 Owner's Manual & Installation Manual

English
Owner’s Manual
M205/M505
9
Select Tuner As Playing Source
Press the [ / SRC ] Source button to select the
TUNER mode.
World Tuner
This unit is initially set to USA frequency intervals of
10 kHz for AM and 200 kHz for FM. When using it
outside the USA, the frequency reception range can
be switched to the intervals below.
U.S. A
standard
Europe
standard
Asia
standard
Australia
standard
AM
Frequency
spacing
10KHz 9KHz 9KHz 9KHz
Frequency
range
530-1710
KHz
531-1602
KHz
531-1620
KHz
531-1620
KHz
FM
Frequency
spacing
200KHz 50KHz 50KHz 100KHz
Frequency
range
87.9-107.9
MHz
87.5-108
MHz
87.5-108
MHz
87.5-108
MHz
Selecting The Radio Band
Press the [BAND] button on the panel to select one
radio band.
[ ] Tuning Up / [ ] Tuning
Down Buttons
1. Press the [
] / [
] button change intervals step
by step.
2. Press and hold the [ ] / [
] button to seek the
next strongest station.
Recalling a Preset Station
Press one numeric button among 1 to 6 on the front
panel to select the corresponding stored stations.
Preset Scan
Preset scan receives the stations stored in the
preset memory in order. This function is useful when
searching for a desired station in the memory.
1. Press the [PS/AS] button.
2. When a desired station is tuned in, press the [PS/AS]
button again to continue receving that station.
Auto Store
Only stations with sufcient signal strength will be
detected and stored in the memory.
Press and hold the [PS/AS] button to automatically
select six strong stations and store them into six
presets. The new stations replace any stations
already stored in the band.
Manual Store
When one expected radio station has been detected,
press and hold number button 1-6 to store it in the
memory.
Local Seek
When LOCAL seeking is ON, only those radio stations
with strong radio signals can be received. To select
LOCAL function, press and hold the [DISP] button on
the front panel, then press the [
] / [
] button
repeatedly until LOCAL or DX display on the LCD,
rotate the [VOLUME] knob to select local or distant
mode.
Area Set
This option allows you to select the appropriate
frequency spacing for your area.
1. Press and hold the [DISP] button.
2. Press the [
] / [
] button to select “AREA”
3. Rotate the [VOLUME] knob to select: “U.S.A”,
“Europe”, “Asia”, “AUST (Australia)”
4. Press the [MUTE]buttontoconrm.
Radio Operation

Clarion M505 Specifications

General

Brand	Clarion
Model	M505
Category	Car Receiver
Language	English