96 NX603 English
x All maneuvers are available in intersections.
x Directional constraints are taken into account the way that opposite direction is allowed with
a low speed.
x A private road is used only if the destination is there.
x Walkways are excluded from routes.
x
:
x Maneuver restrictions and directional constraints are taken into account when planning a
route.
x Roads are used only if access for buses is allowed.
x Private roads, resident-only roads and walkways are excluded from routes.
x
:
x Maneuver restrictions and directional constraints are taken into account when planning a
route.
x Roads are used only if access for taxis is allowed.
x Private roads, resident-only roads and walkways are excluded from routes.
x
:
x Maneuver restrictions and directional constraints are taken into account when planning a
route.
x Roads are used only if access for trucks is allowed.
x Private roads, resident-only roads and walkways are excluded from routes.
x U-turns are excluded from routes (turning back on a divided road is not considered as a U-
turn).
Route Planning Method types:
Button Description
Gives a quick route if you can travel at or near the speed limit on all roads. Usually
the best selection for fast and normal cars.
Gives a short route to minimize the distance to travel. It can be practical for slow
vehicles. Searching for a short route regardless of the speed, this route type is
rarely practical for normal vehicles.
To Next Page
Loading...
Need help?
General
