To Next Page
S
Stephen ThompsonSep 9, 2025
Why does my Clarion Car Receiver sound skip when playing MP3 files?
- JJennifer MitchellSep 9, 2025
If the sound skips or is noisy on your Clarion Car Receiver, use MP3/WMA files encoded properly.
Why does my Clarion Car Receiver sound skip when playing MP3 files?
If the sound skips or is noisy on your Clarion Car Receiver, use MP3/WMA files encoded properly.
What does 'PARENTAL VIOLATION' mean on my Clarion NX702?
If your Clarion Car Receiver displays 'PARENTAL VIOLATION' and the disc cannot play, release the view limitation or change the parental level. See the subsection 'Setting up the parental level.'
Why is the audio quality poor with Bluetooth on my Clarion Car Receiver?
If you are experiencing poor audio quality after connecting a Bluetooth-enabled device to your Clarion Car Receiver, adjust the gain of the internal microphone in the System Setup. Also, adjust the gain and position of the external microphone, for example, stick the microphone onto the dashboard so it is close to the driver.
Why does my Clarion Car Receiver keep resetting itself?
If your Clarion Car Receiver is resetting itself when the engine is off, it could be due to an incorrect connection between the ACC and the battery. Check the wiring and correct it. Alternatively, the battery voltage may be too low. In this case, try charging the battery or replacing it with a new one.
Why are video images not displayed on my Clarion NX702?
If the video images are not displayed on your Clarion Car Receiver, check that the parking brake is engaged. Also, adjust the dimmer properly if the dimmer control is too low.
What to do if my Clarion NX702 Car Receiver won't power on and the display is not accurate?
If your Clarion Car Receiver's unit cannot power on, buttons don't work, and the display is inaccurate, the microprocessor may have malfunctioned. Turn off the power and press the [RESET] button with a thin rod. Note that pressing the [RESET] button will clear frequencies of radio stations, titles, etc., stored in memory.
What to do if my Clarion Car Receiver won't load a disc?
If your Clarion Car Receiver is not loading a disc, eject the disc before loading the new one if another disc is already loaded. Also, remove any object installed inside the unit.
How to improve poor sound quality on Clarion NX702 Car Receiver?
If your Clarion Car Receiver exhibits poor sound quality or distortion, ensure you are using a standard disc. If the speaker power rating does not match the unit, replace the speakers. Check the wiring and correct any wrong connections. Also, check the wiring and correct if the speaker is shorted.
Why is the display on my Clarion NX702 Car Receiver dark?
If your Clarion Car Receiver display is dark, adjust the brightness properly. If the temperature inside the vehicle is 0°C or lower, set it to an appropriate temperature (25°C or so) and check it again. Also, the display is made dark at night to prevent glare when the vehicle headlights are lit.
Why isn't my Clarion NX702 remote control working?
If the remote control for your Clarion Car Receiver is not working, the battery may be depleted. Try changing the battery. Also, make sure the battery is installed correctly.
Describes various types of buttons and controls used in the application interface.
Explains how to view and navigate the live map, including the Vehimarker and GPS status.
Details the options available from the main Navigation Menu.
Outlines the various methods for selecting a destination for route planning.
Shows how to display the full planned route on the map for an overview.
Describes how to view route details and access related functions like editing or canceling.
Explains various ways to modify an active route.
Explains how to save a location to the Favorites list for quick access.
Describes destination selection for off-road routes, similar to on-road.
Details the differences in navigation and map display when using off-road mode.
Explains core concepts used within the navigation software.
Lists and describes the various options and applications accessible from the 'More' menu.
Allows configuration of application settings and behavior.
General| MP3 playback | Yes |
|---|---|
| CD-RW playback | - |
| Audio formats supported | MP3, MP4, WMA |
| USB version | 2.0 |
| Bluetooth profiles | A2DP, AVRCP, DUN, HFP, HSP, OPP, PBAP |
| Line outputs (RCA) | 6 |
| USB ports quantity | 1 |
| DIN size | 2 DIN |
| Output power | 200 W |
| Product color | Black |
| Disc types supported | CD, CD-R, DVD |
| Audio output channels | 4.0 channels |
| Maximum power per channel | 50 W |
| Supported radio bands | AM, FM |
| Display diagonal | 7 \ |
| Compatible memory cards | MicroSD (TransFlash) |
