16 DRX7575z
Other Handy Functions
Mode Number of titles
Radio mode 30 titles
CD mode 50 titles
TV mode 15 titles
CD changer mode Number of titles
CDC655z connected 60 titles
CDC655Tz connected 100 titles
CDC1255z connected 50 titles
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for radio stations and
CDs. The numbers of titles that can be entered
for each mode are as follows.
1. Press FNC button 3 to select the mode you want
to enter a title. (radio, CD, CD changer or TV)
∗ Titles cannot be entered for MDs with this unit.
2. Select and play a CD or a CD in the CD changer
or tune to an appropriate TV or radio station.
3. Press DISP button ! and display the subtitle.
4. Press TITLE button 4. “TITL” appears in the
display and the cursor position flashes.
5. Press the right or left side of SEARCH button
% to move the cursor.
6. Press DISP button ! to select a character.
Each time you press DISP button !, the
character changes in the following order:
Capital letters ➜ Small letters ➜ Numbers ➜
Symbols ➜ Capital letters...
7. Turn the Rotary knob & to select the desired
character. Turning the Rotary knob &
clockwise moves the cursor to the next
character; turning it counterclockwise moves
the cursor to the previous character.
8. Repeat steps 5 to 7 to enter up to 10
characters for the title.
9. Press and hold ENT button 2 for 2 seconds
or longer to store the title into memory and
cancel title input mode.
Clearing titles
1. Play a CD or a CD in a CD changer or tune a
radio station or TV station that you want to
clear the title for.
2. Press DISP button ! and display the sub-
title.
3. Press TITLE button 4. “TITL” appears in the
display and the display switches to the title
input display.
4. Press BND button #.
5. Press and hold ENT button 2 for 2 seconds
or longer to clear the title and cancel the title
input mode.
Adjusting the display contrast
You can adjust the display contrast according to
the angle of installation of the unit.
∗ The factory default setting is “6”. (Adjustment level:
1 to 11)
1. Press and hold ADJ button 4 for 1 second or
longer to switch to the adjustment selection
display.
2. Press the right or left side of SEARCH button
% to select “CONTRAST”.
3. Press ENT button 2.
4. Turn the Rotary knob & clockwise or
counterclockwise to adjust the contrast.
5. Pressing ENT button 2 returns to the
adjustment selection display.
6.
Press ADJ button 4 to return to the previous mode.
Message display
When the unit is powered on or off, a message is
displayed. The user can turn this message
display on or off.
∗ The factory default setting is “ON”.
1. Press and hold ADJ button 4 for 1 second or
longer to switch to the adjustment selection
display.
2. Press the right or left side of SEARCH button
% to select “MESSAGE”.
3. Press ENT button 2.
4.
Turn the Rotary knob & clockwise to set the
message display to “ON”; turn it counterclockwise
to set the message display to “OFF”.
5. Pressing ENT button 2 returns to the
adjustment selection display.
6.
Press ADJ button 4 to return to the previous mode.
Triggered audio mute for cellular
telephones
This unit requires special wiring to mute the audio
signal automatically when a cellular telephone
rings in the car.
∗ This function is not compatible with all cellular
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
To Next Page
Loading...
Need help?
FM Tuner
Audio
