EasyManua.ls Logo

Clarion ProAudio DXZ935 - Advanced Audio Processing; Dolby Pro Logic II Features; Filter Adjustment Details

Clarion ProAudio DXZ935
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DXZ935 15
English
AC-Processor
II
Operations
Dolby Pro Logic
II
Dolby Pro Logic II is a matrix decoding technol-
ogy in which the updated digital matrix technol-
ogy is applied and Dolby Pro Logic is further im-
proved. It realizes excellent 5.1 channel repro-
duction of Dolby surround source as well as ste-
reo sound sources such as CDs, thereby caus-
ing a surround channel to be full-ranged (20 Hz
to 20 kHz) and become stereo. Therefore, you
can enjoy any stereo sources with dynamic
sound of 5.1 channel. According to a source to
be reproduced, Music Mode or Matrix Mode can
be selected.
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic and the double-
D symbol are trademarks of Dolby Laboratories.
Music Mode
This mode is suitable for stereo sources like
CDs. By optimizing frequency characteristics of
the surround channel, a broader and deeper
sound is assured. In addition, since broadness
of the sound field varies with recording condi-
tions of music sources, there is Adjusting Mode
which makes a finer tuning available. (cf. page
16)
Matrix Mode
This mode is suitable for AM/FM radio.
Selection and switching of the
Dolby Pro Logic
II
effect
While the Dolby PLII indication is lit in the dis-
play, the Dolby PLII effect is set to On.
1.
Setting the speaker 5.1ch ( For detail, see the
section Basic Operation - Speaker setting).
2. Press the [PLII ] button so that PLII mode is
turned on. Each time the button is pressed,
the mode changes as follows: MUSIC
MODE MATRIX MODE PLII OFF
MODE MUSIC MODE
3. Select the PLII OFF MODE to turn off the
Dolby Pro Logic effect. Also press the [VSE]
button or [EQ] button to turn off the Dolby
Pro II .
Sub Woofer Low Pass Filter Adjustment
Range is 50, 80, 120Hz (18dB/oct), OFF.
When PLII mode Sub Woofer Low pass Filter
Adjustment Range is 50, 80, 120Hz (12dB/
oct.), OFF.
High Pass Filter adjustment Range is 50, 80,
120Hz(12dB/oct), thrgh.
Note:
High pass filter adjustment is available for Front
2ch and Rear 2ch only AC-Pro
II
PRO Mode.
Basic Operations

Related product manuals