22 DXZ935
English
Entering titles–Adjusted Effect
items title
You can give a title to the user memory of the
AC-PII VSE POSITION and P.EQ that you have
adjusted.
1. Select the adjustment mode in which you
want to give a title.
2. Press the [BND] button to select the user
preset side.
3. Press one of the [DIRECT] buttons to select
the use memory to which you want to give a
title.
4. Press the [TITLE] button.
5. Press the [a] or [d] button to move the
cursor.
6. Press the [DISP] button to select the charac-
ter. Each time you press the [DISP] button,
the character changes in the following order:
Capital letters ➜ Small letters ➜ Numbers
and Symbols ➜ Umlaut ➜ Capital letter…
7. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust desired character.
8. Repeat steps 5 to 7 to enter up to 10 charac-
ters for the title.
9. Press and hold the the [ ] button for 2
second or longer to store the title into
memory and cancel title input mode.
Clearing titles
1. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
clear the title.
2. Press the [DISP] button and display the
main.
3. Press the [TITLE] button. “TITL” appears in
the display and the display switches to the
title input display.
4. Press the [BND] button.
5. Press and hold the [ ] button for 2 sec-
onds or longer to clear the title and cancel
title input mode.
Dimmer Level
1. Press the [TITLE] button for 1 second or
longer to enter ADJ mode.
2. Press the [a] or [d] button to select the
“DIMMER LV”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust Dimmer level.
Operations Common to Each Mode
4. Press the [TITLE] button to return to the pre-
vious mode.
∗ Adjustment range is off to LV5.
∗ Factory default setting is LV3.
Contrast
1. Press the [TITLE] button for 1 second or
longer to enter ADJ mode.
2. Press the [a] or [d] button to select the
“CONTRAST”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust Contrast level.
4. Press the [TITLE] button to return to the pre-
vious mode.
∗ Adjustment range is LV1 to LV18
∗ Factory default setting is LV18.
Key Illumi
1. Press the [TITLE] button for 1 second or
longer to enter ADJ mode.
2. Press the [a] or [d] button to select the
“KEY ILLUMI”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select Key illumi color.
4. Press the [TITLE] button to return to the pre-
vious mode.
∗ Selectable color is Green or Red.
∗ Factory default setting is Green.
Message display
When the unit is powered on or off, a message
is displayed. The user can turn this message
display ON or OFF.
∗ The factory default setting is “ON”.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
2. Press the [a] or [d] button to select “MES-
SAGE”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to set the message display ON
or OFF.
4. Press the [TITLE] button to return to the pre-
vious mode.
To Next Page
Loading...
