English
8 RG-9451S
Tuning
3 tuning modes are available: seek tuning,
manual tuning and preset tuning.
Seek tuning
Press and hold (1 sec.) [ ] or [ ] to
automatically seek stations.
When the [ ] button is pressed, the station is
sought in the direction of higher frequencies; if
the [ ] button is pressed, the station is sought
in the direction of lower frequencies.
Manual tuning
Press [ ] or [ ] to manually tune a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
AM1, 6-AM2) can be used to store broadcast
stations in memory. Press the corresponding
[DIRECT] button to automatically recall the
stored frequency.
Manual memory
1. Use seek tuning or manual tuning to select
the desired station.
2. Press and hold one of the [DIRECT] buttons
(2 sec.) to store the current station in preset
memory.
Auto store
The auto store function stores up to 6 stations
automatically tuned in sequential order. If 6
stations cannot be found, any previously stored
station remains in its memory position.
1. Press the [BAND] button and select the
desired band (FM/AM).
2. Press the [AS] button. The stations with
good reception are stored automatically to
the preset channels.
AUX function
An external input jack (AUX1) on the front panel
and a rear AUX terminal (AUX2) are provided to
allow playback of sound and music from
external devices.
● Selecting AUX mode
1. Press the [PWR/SRC] button to select “AU1”
(AUX1) or “AU2” (AUX2).
WARNING
If the front panel’s external input jack AUX
cover is fastened insecurely, water could
enter the unit, causing malfunction or fire.
Always be sure the AUX cover is fastened
securely when the jack is not in use. Also,
whenever a plug is inserted into the jack,
avoid exposing the connector to water or
other liquid.
To Next Page
Loading...
