51
© 2005 directed electronics, inc.
Trigger or Triggered Sequence:
This is what happens when the
alarm “goes off” or “trips.” The triggered sequence of your
system consists of the siren sounding and parking lights flashing
for the programmed duration.
Valet
®
Button:
A small push-button switch mounted at a discre-
tionary location inside the vehicle. It is used to override the
starter interrupt when a remote is lost or damaged, or to enter or
exit Valet
®
Mode.
Warning Zone Response:
Lighter impacts to the vehicle will
generate the Warning Zone response. It consists of several
seconds of siren chirps and parking light flashes.
Zone:
A zone is a separate input that the alarm can recognize as
unique. Each input to the system is connected to a particular
zone. Often two or more inputs may share the same zone.
To Next Page
Loading...
Need help?
General
