31
© 2005 directed electronics, inc.
remote start
This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm
up the engine, as well as adjust the interior temperature of the
vehicle with the climate control system. If interior heating or
cooling is desired, the climate controls must be preset, and the
fan blower must be set to the desired level prior to remote
starting the vehicle.
To remote start the vehicle:
1. Press on the remote twice within 3 seconds.
2. The parking lights will flash to confirm that the vehicle will
attempt to start.
3. A remote start page notification with a unique melody (or
vibration) will be generated and the LCD will display the
remote start (19) icon as long as the vehicle is running.
4. In gasoline vehicles, the engine will start 4 seconds after the
parking lights flash. In diesel vehicles, the engine will start
when the WAIT-TO-START indicator on the vehicle's dash
goes out.
note: The 2-way remote will generate a Page Notification
with a different unique two-tone beep (or vibrate) and
the remote start (19) icon will turn off when the remote
start shuts down.
iimmppoorrttaanntt!!
(1) Never remote start your vehicle when the
keys are in the ignition, except when performing Valet
®
Take-Over, and (2) Never start the vehicle if it is not in
either PARK or NEUTRAL.
➜
To Next Page
Loading...
Need help?
General
