To Next PageTo Next PageWhat to do if my Clarion Car Video System power does not turn on?
If your Clarion Car Video System doesn't power on, and no sound is produced, there are a couple of things to check: * **Blown Fuse:** Replace the fuse with one of the same amperage. If it blows again, consult your store of purchase. * **Incorrect Wiring:** In this case, it's best to consult your installation center.
Why is my Clarion VX400 Car Video System remote control not working?
Your Clarion Car Video System remote control might not be working due to these reasons: * **Direct Sunlight:** If direct sunlight is hitting the light-receptive part of the remote, it may not function correctly. * **Battery Issues:** The batteries in the remote might be dead or missing. Check and replace the batteries as needed.
What to do if my Clarion VX400 Car Video System disc cannot be loaded?
If your Clarion Car Video System is unable to load a disc, consider the following: * **Disc Already Loaded:** Eject the current disc before trying to load a new one. * **Foreign Matter:** Check the disc slot for any foreign objects. If there are any, remove them, or consult a service station.
What to do if my Clarion VX400 sound skips or is noisy?
If the sound from your Clarion Car Video System skips or is noisy, here's what you can do: * **Dirty Disc:** Clean the compact disc with a soft cloth. * **Damaged Disc:** Replace the compact disc with one in good condition if it is heavily scratched or warped.
What to do if nothing happens when buttons are pressed on my Clarion VX400 Car Video System?
If nothing happens when you press the buttons on your Clarion Car Video System, and the display is inaccurate, it could be due to a microprocessor malfunction. To resolve this: 1. Turn off the power. 2. Open the operation panel. 3. Press the reset button with a thin rod. Note that pressing the reset button will turn off the ACC power and clear any stored radio frequencies and titles.
Why is the sound bad right after I turn on my Clarion VX400 Car Video System?
If the sound quality is poor immediately after turning on your Clarion Car Video System, it might be due to condensation on the internal lens. This can happen when the car is parked in a humid environment. To fix this, let the unit dry for about 1 hour with the power on.
Why are video images not displayed on my Clarion VX400 Car Video System?
If video images are not displaying on your Clarion Car Video System, make sure the parking brake is engaged.
What to do if my Clarion VX400 disc cannot play and shows "PARENTAL VIOLATION"?
If your Clarion Car Video System displays "PARENTAL VIOLATION" and the disc won't play, it means the feature exceeds the set parental level. To resolve this, release the view limitation or change the parental level. See the subsection “Setting up the parental level.”
Why is there no sound with the display “NO FILE” shown on my Clarion VX400?
If your Clarion Car Video System displays “NO FILE” and there is no sound, it means there are no MP3/WMA files stored on the USB device. Ensure that these files are properly stored on the USB device.
Why does the sound skip or is noisy with MP3/WMA files on my Clarion VX400?
If the sound skips or is noisy when playing MP3/WMA files on your Clarion Car Video System, it's likely that the MP3/WMA files are not encoded properly. Use MP3/WMA files that are encoded correctly.
General| Resolution | 800 x 480 pixels |
|---|---|
| Touchscreen | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| Navigation | No |
| DVD Player | Yes |
| Rear View Camera Input | Yes |
| Audio Formats Supported | MP3, WMA |
| AM/FM Radio | Yes |
| Video Input | Yes |
| Video Output | Yes |
| Video Formats Supported | AVI, DivX |
| Maximum Power | 50W x 4 channels |
