41
VX404E
English
English
Owner’s Manual
English
Owner’s Manual
Service Scan
When you want to update the list with the current
services in Ensemble List or PTY List, please perform
Service Scan.
1. Press the Option [ ] button to display option
menu.
2. In Option, press the [Start] button.
3. Press the [OK] button to start updating the service
list, press the [Cancel] button to cancel this
operation then back to previous menu.
4. When scanning the services, this image will display.
Notes:
After service scan, currently available services will be
updated in the Ensemble List and PTY List.
DAB Band
When press the Preset Scan Button,the Band will
change as DAB1->DAB2->DAB3->DAB1···
Preset Scan
Preset Scan tunes to the Services stored in the preset
list in order.
1. Press the [DAB1/2/3] Button to select the desired
band.
2. Press the Preset Scan [ ] button to start the
Preset Scan.
The head unit starts scanning each station for
playing10 seconds sequentially.
3. When the desired station is tuned in, touch the
Preset Scan [ ] button again to keep in the
station.
Service Link setting
You can select Service Link mode from On or Off. If
this setting is set to ON, and current Service signal
gets weak, it is to be linked to the service with better
signal.
1. Press the Option [ ] button to open option menu
display.
2. Press the On button to switch on.
Press the Off button to switch off.
Notes:
If the service is linked to the FM station, the FM indicator
will be turned on.
To Next Page
Loading...
Need help?
General
