Clarion VX404E User Manual

50
USB/SD DEVICE
Problem Cause Measure
USB/SD device cannot be
inserted.
The USB/SD device has been
inserted with wrong direction.
Reversing the connection
direction of the USB/SD device,
try it again.
The USB/SD connector is
broken.
Replace with a new USB/SD
device.
USB/SD device is not
recognized.
The USB/SD device is
damaged.
Disconnect the USB/SD device
and reconnect. If the device
is still not recognized, try
replacing with a dierent USB/
SD device.
Connectors are loose.
No sound heard with the
display “NO FILE” shown.
No MP3/WMA le is stored in
the USB/SD device.
Store these les properly in the
USB/SD device.
Sound skips or is noisy. MP3/WMA les are not
encoded properly.
Use MP3/WMA les encoded
properly.
The video image of iPod/
iPhone is disturbed.
The TV Signal setting of the
iPod/iPhone is not set correctly.
Set the TV Signal setting
(NTSC/PAL) of the iPod/iPhone
correctly.
Bluetooth
Problem Cause Measure
Cannot pair the Bluetooth
enable device with the car
audio system.
The device does not support
the proles required for the
system.
Use another device to connect.
The Bluetooth function of the
device is not enabled.
Refer to the user manual of the
device for how to enable the
function.
The audio quality is poor after
connection with a Bluetooth
enabled device.
The Bluetooth reception is
poor.
Move the device closer to the
car audio system or remove
any obstacle between the
device and the system.

Clarion VX404E Specifications

General

Brand	Clarion
Model	VX404E
Category	Car Video System
Language	English