Clarion XH5410 - APPLICATIONS; Mono subwoofer system (XH5210 and XH5410); Mono Amp configuration (XH5210)

14 XH5210/XH5410/XH7110
English
Owner’s Manual
XH7110 power and speaker connections
1. Left rear speaker output
2. Right rear speaker output
3. Mono speaker output
4. Remote turn-on connection
5. Ground input
6. Fuses
7. Battery 12V connection
Applications
Mono subwoofer system (XH5210 and XH5410)
In this application, the rear channels are bridged for mono operation to drive a
subwoofer while the front channels are available to drive a set of full-range speakers.
Mono Amp configuration (XH5210)
• Set crossover mode to LP
• Set input mode switch to L + R (Mono)
• Set crossover frequency to ~80Hz
• Fine-tune crossover frequency to suit
musical tastes and performances
• 2Ω min stereo / 4Ω min mono
12 3 4