To Next Page
K
Kelly ThomasJul 26, 2025
What to do if my Clarity Telephone has no audible ring?
- TtayloranthonyJul 26, 2025
If your Clarity Telephone is not ringing, ensure that the ringer switch is not in the "Off" position.
What to do if my Clarity Telephone has no audible ring?
If your Clarity Telephone is not ringing, ensure that the ringer switch is not in the "Off" position.
How to fix a Clarity Telephone with no dial tone?
If there is no dial tone on your Clarity Telephone, check all the phone cord connections to ensure they are properly connected.
Why does my Clarity not dial when I press a memory button?
If no number is dialed when you press a memory button on your Clarity Telephone, it could be because no number is stored in that memory button. Refer to the "Programming Frequently Dialed Numbers" section for instructions.
How to fix Clarity that cannot dial or dials slowly?
If your Clarity Telephone cannot dial a call or dials slowly, refer to the "Installation" section to reset the dial mode switch.
Steps to set up the phone for desktop use.
Instructions to increase call volume using the AMPLIFY button.
Steps to program speed dial numbers for emergency calls.
Steps to program speed dial numbers for frequent use.
How to record custom voice announcements for emergency buttons.
How to record custom voice announcements for memory buttons.
General
