49
English
48
6.9 Conditional Access System
2) The Status of the Smart Card
You can access detailed information about the Smart Card using the / keys in
the Main Menu to select ‘CA’ and pressing . <Figure 6.9.2>
Proceed with further instructions displayed on the screen to check more detailed
information depending on the Smart Card in use.
ҫ
Note : Further detailed information is not mentioned in this manual since the
information depends on the Smart Card in use.
<Figure 6.9.2>
6.9 Conditional Access System
1) Card Initializing
To Enjoy CONAX CAS7 scrambled channels, you will need a Smart Card from the service
provider (program distributor). If you are subscribing to services from more than one service
provider, you will need a Smart Card from each one. Since a Smart Card is connected to
a single service provider, a limited range of channels will be available via it.
ҫ
Note : Without the Smart Card, you can watch only Free-To-Air programs.
Insert the Smart Card into the receiver’s slot designed for it.
The message ‘Smart Card Initializing’ will appear on the screen. <Figure 6.9.1>
After the message ‘Smart Card Initializing’ has disappeared, you will be able to watch
the channels offered by the service provider.
<Figure 6.9.1>
To Next Page
Loading...