Page - 4 - Clarke
®
Operator's Manual - Ultra Speed Burnisher 1700
19" (48cm) 3M Burnishing Pad Selection Chart
Part No. Description Application Use RPM Color Finish
976289 Top Line Burnish Dry 1500-3000 Peach Hard finish/high traffic
Soft finish/low traffic
976326 Natural Blend Burnish Dry 1500-3000 Off White Hard finish/high traffic
Soft finish/low traffic
High traffic/low
Maintenance
976235 UHS Tan Burnish Dry 1500-3000 Tan Hard finish/high traffic
Buffer Wet-look hard finish
976236 UHS Aqua Burnish Dry 1500-3000 Aqua Soft finish/low traffic
Buffer Wet-look soft finish
Electric burnishers are floor polishing machines. They are operated by moving them forward and backward
across the floor. Note: Do not use the machine for wet scrubbing.
FEATURES AND SPECIFICATIONS
CAUTION: To prevent serious damage to the floor surface, make sure the machine is always moving forward
or backward when the pad is in contact with the floor.
Specifications
OPERATOR SAFETY INSTRUCTIONS (cont.)
WARNING: To avoid injury keep hands, feet and loose clothing away from all moving parts of this machine.
CAUTION: The machine is heavy. Get assistance before attempting to transport or move it.
CAUTION: To prevent serious damage to the floor surface, when using burnisher, make sure the machine
is always moving forward or backward when the pad is in contact with the floor.
CAUTION: To prevent overloading motor, do not use burnisher for wet scrubbing. There is no skirt on
burnisher to contain water. Water could splatter.
Model 01193B
Voltage (V) 120
Frequency (Hz) 50/60
Current (A) 12.5
Operators Handle plastic
Pad Driver 20"
Burnishing Swath 20"
Pad Speed (rpm) 1700
Motor Horsepower 1.5
Power Cable Length (ft) 50
Weight (lbs.) 82
To Next Page
Loading...
