Clarke FM-1700 - User Manual

Form No. 56091119 1/14 revised 4/2015 REV C
FM-1700, FM-2000
Operator's Manual / Manuel d'utilisation / Libro de Instrucciones
Models:
01014A (FM-1700), 01016A (FM-2000)
This book has important information for the use and safe operation of this machine. Failure to read this book prior to
operating or attempting any service or maintenance procedure to your Clarke machine could result in injury to you or to
other personnel; damage to the machine or to other property could occur as well. You must have training in the operation
of this machine before using it. If your operator(s) cannot read this manual, have it explained fully before attempting to
operate this machine.
All directions given in this book are as seen from the operator’s position at the rear of the machine.
English (2-8)
Español (10-16)
Français (18-24)
READ THIS BOOK
LEA ESTE MANUAL
LISEZ CE MANUEL
ES
EN
FR

Summary

Operator Safety Instructions

General Safety Warnings

Covers DANGER, WARNING, and CAUTION statements for risks to personnel and property.

Specific Operational Risks

Highlights risks like fire, explosion, incomplete assembly, and electrocution.

Maintenance, Electrical, and Floor Safety

Includes warnings on repairs, electrical hazards, moving parts, and floor conditions.

Power Supply and Extension Cords

Electrical Grounding Requirements

Ensuring proper grounding for safety and preventing shock.

Extension Cord Guidelines

Operating the Machine Safely

Flammable Materials & Voltage Check

Warnings about flammable materials and verifying machine voltage/frequency.

Starting and Stopping Procedure

Accessories and Maintenance

Maintenance Procedures and Schedules

Section II Parts Manual

Wiring Diagram

Clarke FM-1700 Specifications

General

Brush Motor	1.5 hp
Pad Size	17 inches
Motor Power	1.5 hp
Working Width	17 inches
Voltage	120 V
Frequency	60 Hz
Brush Speed	175 RPM
Power Cable Length	50 ft