Clarke Fusion 20 User Manual

Form No. 71446A 4/09 Clarke
®
Printed in the U.S.A.
FUSION 20
FUSION 20T
This book has important information for the use and safe operation of this machine. Failure to read this
book prior to operating or attempting any service or maintenance procedure to your Clarke machine
could result in injury to you or to other personnel; damage to the machine or to other property could occur
as well. You must have training in the operation of this machine before using it. If your operator(s) cannot
read this manual, have it explained fully before attempting to operate this machine.
All directions given in this book are as seen from the operator’s position at the rear of the machine.
For new books write to: Clarke
®
, 2100 Highway 265, Springdale, Arkansas 72764.
English (2 - 13)
Español (14 - 25)
Français (26 - 36)
READ THIS BOOK
LEA ESTE MANUAL
LISEZ CE MANUEL
ES
EN
FR
Operator's Manual
Manuel d'utilisation
Libro de Instrucciones

Clarke Fusion 20 Specifications

General

Brand	Clarke
Model	Fusion 20
Category	Floor Machine
Language	English

Summary

Operator's Manual

Operator Safety Instructions

General Safety Warnings and Precautions

Covers DANGER, WARNING, and CAUTION statements for safe operation.

Introduction and Machine Specifications

Machine Specifications Overview

Technical specifications for Fusion 20 and 20T models.

Machine Control Panel Layouts

Machine Preparation for Operation

Battery Installation and Charging Procedures

Instructions for installing batteries and charging.

Machine Preparation and Pad Adjustment

Pad Installation and Replacement

Steps for installing or removing the burnishing pad.

Operating Procedures

Operating the Fusion 20 (Non-Traverse)

Instructions for operating the standard Fusion 20 model.

Operating the Fusion 20T (Traverse)

Instructions for operating the Fusion 20T with traverse function.

Maintenance and Care

Battery Maintenance Guidelines

Essential steps for maintaining battery health.

Routine Weekly Maintenance Tasks

Required maintenance tasks to be performed weekly.

Troubleshooting and Accessories

Troubleshooting Common Issues

Solutions for vibration, swirl marks, and running time.

Section II: Parts and Service Manual

Fusion 20 Handle Assembly Diagram and Parts

Drawing and parts list for Fusion 20 Handle Assembly.

Fusion 20T Handle Assembly Diagram and Parts

Drawing and parts list for Fusion 20T Handle Assembly.

Fusion 20 Electrical Schematic

Fusion 20T Electrical Schematic