12
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
5. Set the engine switch to ‘I’
6. Pull the starting handle lightly until
you start to feel resistance and
then pull up sharply to start the
generator.
NOTE: You may have to do this
more than once.
.
7. Once the engine has warmed up,
set the choke lever to the ‘RUN’
po
sition.
WARNING: ONCE THE GENERATOR HAS STARTED, RELEASE THE STARTING
HANDLE SLOWLY TO AVOID INJURY/DAMAGE AS IT WHIPS BACK.
To Next Page
Loading...
Need help?
General
