16
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
Maintenance
CHANGING THE ENGINE OIL
1. Unscrew and remove the oil filler cap/dipstick.
2. Place a oil collection tray under the drain plug.
3. Unscrew the drain plug, and allow the used engine oil to drain from the
crankcas
e into the oil collection tray.
NOTE: Drain the eng
ine oil when the engine is warm, this will ensure the
oil flows out quicker.
4. Replace the drain plug and
its seal ring.
5. Fill the crankcase with engine oil to the ‘H’ mark
on the dipstick. See
page 9.
6. Replace the oil filler cap/dipstick.
ENVIRONMENTAL PROTECTION
One of the most damaging sources of pollution is oil, do not throw away used
engine oil in with your domestic trash or down drains and sinks. Place it in a
leak proof container and take it to your local waste disposal site.
CAUTION: PROLONGED EXPOSURE TO USED ENGINE OIL IS DANGEROUS,
ALWAYS WASH YOUR HANDS THOROUGHLY AFTER HANDLING USED
ENGINE OIL.
To Next Page
Loading...
Need help?
General
