10
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
1. Connect a supply hose to the inlet
adaptor.
• We recommend that you use a
push fit quick connector (not
supplied) .
• The water supply must be able
to deliver at least 7.5 l/min with
an inlet temperature not
exceeding 40°C.
ATTACH THE EXTENSION LANCE
1. Push the extension lance into the
gun assembly and rotate it 90
degrees.
2. The detergent bottle may also be
fitted in the same way. (See
“Using Detergents” on page 12.).
GUN ASSEMBLY SAFETY LOCK
1. Push the lock button to prevent
the trigger from being pulled.
2. Push the unlock button to release
the trigger lock.
To Next Page
Loading...
Need help?
General
