13
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
CARE AND MAINTENANCE
1. Clean the exterior part of the machine with a dry cloth.
CLEANING THE WATER INLET FILTER:
To ensure the pump gives good service it is extremely important to check and
clean the water inlet filter frequently.
1. Use pliers to extract it from the
pump
2. Rinse it carefully in running water.
CLEANING THE NOZZLE:
A blockage in the nozzle may prevent the machine from operating correctly,
so it must be kept clean.
1. Switch off the machine.
2. Remove the lance.
3. Clean the nozzle with the pin
provided.
4. Rinse the lance in running water.
WARNING: DISCONNECT THE MACHINE FROM THE POWER SOURCE
DURING CLEANING OR MAINTENANCE.
WARNING: DO NOT SPRAY THE MACHINE WITH WATER AND DO NOT USE
DETERGENTS OR AGGRESSIVE SOLVENTS AS THEY COULD DAMAGE THE
MACHINE.
To Next Page
Loading...