EasyManua.ls Logo

Clarke HARRY - Preparation for Use; Filling with Diesel Fuel; Connecting to Water Supply

Clarke HARRY
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
BEFORE USE
FILL WITH FUEL (DIESEL ONLY)
Always refuel in a well-ventilated area.
Do not leave fuel within the reach of children.
Refuel carefully to avoid spillages.
1. Remove the filler cap.
2. Fill the tank with diesel fuel.
Maximum 1 litre.
3. Replace the filler cap securely.
CONNECT TO A WATER SUPPLY
The pressure washer must never be connected to the drinking water supply
without using a system separator (also known as a backflow preventer)
available from most hardware stores.
Always follow the regulations of your local water supplier.
WARNING: INCORRECT FUELS
MUST NOT BE USED AS THEY MAY
PROVE HAZARDOUS.
CAUTION: WATER THAT HAS FLOWED THROUGH A SYSTEM SEPARATOR IS
CONSIDERED NON-DRINKABLE.

Related product manuals