11
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
OPERATION
SWITCHING ON/OFF
1. Rotate the switch to the required
setting.
•0 - OFF
• 1 - ON (cold wash)
• Flame symbol - Hot Wash
AUTOMATIC STOP SYSTEM
The Automatic Stop System stops the machine during the bypass mode.
The Automatic Stop System will stop the machine and will restart it
automatically when the trigger is pulled.
• It is advisable to activate the safety lock on the gun assembly
whenever the machine is not being used in order to avoid
unintentional starting.
• If the machine starts automatically without pressing the gun trigger
this will be attributable to air bubbles in the water or other similar
phenomena and does not imply the existence of any defects in the
machine.
• Do not leave the machine unattended.
• If you do not intend to used the machine for more than 5 minutes,
turn the switch to the (0) OFF position.
TO CHANGE THE SPRAY PATTERN (PENCIL JET / FAN SPRAY)
1. Hold the shaft of the lance in one
hand.
2. To vary the spray between Pencil
Jet and fan spray, turn the nozzle
counter-clockwise through a half-
a-turn (180°).
To Next Page
Loading...
Need help?
General
