Clarke SE18C200 User Manual

14
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
TORQUE VALUES FOR CYLINDER HEAD BOLTS
MAINTENANCE CHART
MODEL NUMBER Torque Value (NM)
SE11C100, SEV11C100, VVE11A150, PEV11C50,
PEVH11C50, PE11C50, , PPV11ND50, PPVH11ND50
18-22
SE16C150, PE16C50, PEH16C50, SE19C200, SE26C200 28-32
SE15C150 35-37
SE25C200, SP27C150, VE25A150, SE18C200, VE18A150 41.2 - 43.2
CHECK LIST DAILY WEEKLY 6 MONTHLY NOTES
Oil level Check Change
Air Receiver Drain
Intake Filter Check /
Clean
Replace if necessary
Oil breather Check /
Clean
Fan and cooling fins Clean
Inlet and outlet
valves
If worn Contact Clarke
Service department
Non Return Valve Clean Replace if
worn
Belt Tension Check /
Adjust /
Replace if
worn
Does not apply to
direct drive
Big end bearings Check If worn Contact Clarke
Service department
Main bearings Check If worn Contact Clarke
Service department
Piston Rings If worn Contact Clarke
Service department
Cylinder head bolts Check
Torque
settings
See above for details.

Clarke SE18C200 Specifications

General

Brand	Clarke
Model	SE18C200
Category	Air Compressor
Language	English