6
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
ASSEMBLY
Unpack your pressure washer and check to ensure the following items are
present.
Contact your CLARKE dealer immediately if any parts are missing or
damaged.
CONNECTING THE WHEELS
1. Slide the axles into the locating
tube as shown.
• Make sure the ball catch locks
into the small hole on the
bottom of the locating tube.
2. Add the 2 axle covers as shown.
1 x Power Washer 2 x Wheel & Axle Assembly
1 x Hose Bracket c/w Fixings 1 x Nozzle Cleaning Pin
1 x Gun / Lance Bracket c/w Fixings 1 x Tap Adaptor
1 x Hose 1 x Detergent Hose c/w Filter
1 x Lance Assembly 1 x Upper Handle c/w Fixings
1 x Gun Assembly 1 x Engine Manual
1 x Spark Plug Box Spanner 1 x 3m Inlet water hose
1 x Tommy Bar 1 x Water Filter (may be supplied
already fitted)
To Next Page
Loading...
