2 Thesize(diameter)ofweldingrodshouldbeapproximately
thesameas thethicknessofmetalto bewelded.An appropriate
currentmustbe selectedbyturningthelargehandwheel(itemC)
untiltheslidingindicator(itemD) inthe topofthemachineshows
the required amperage setting. With practice you will gain a
feel for the correct amperage setting for different welding rod
thicknesses.
Forbeginners the table below gives some useful guidelines.
I
I
15/64" 240-250
3 To assemble face shield, first place the darkened plastic
window in the recessed window area in the body. Secure in place
using the two plastic screws fasteners provided. Locate the
handle fixing into the slot in the shield body, press firmly and
rotate through 90 degrees until the lug locates into the hole in
the shield body.
To Next Page
Loading...
Need help?
General
