Page 17 of 41
2.5.2 To Stop Engine
If engine is started from main pump controller use
main pump controller to stop the engine.
If engine is started from engine gauge panel: Return
MODE SELECTOR switch to
AUTOMATIC/MANUAL STOP position, engine
will stop. Close cooling system manual by-pass
valve if opened.
IMPORTANT: DO NOT leave the MODE
SELECTOR switch in the MANUAL RUN position
during AUTOMATIC operation. (The controller
will be unable to stop the engine and DAMAGE
MAY RESULT).
2.5.3 Emergency Stop Instructions
If energized to stop solenoid fails, you will NOT be
able to stop the engine from the instrument control
To Next Page
Loading...