Clas Ohlson 922265 - Page 10

10
English
3. Hold down [ SET ] for 2 seconds and thehours will
begin to flash.
- Press [ UP ]/[ DOWN ] to set thehours.
4. Press [ SET ] and theminutes will begin to flash.
- Press [ UP ]/[ DOWN ] to set theminutes.
5. Press [ SET ] or wait for 15 seconds and thesetting
will be saved.
• Thealarm is now on and thealarm symbol will show
on thedisplay.
• Thealarm clock will emit aring signal at theset time,
thesignal will sound for 1 minute or until any of
thebuttons on theback is pressed.
• Theclock will sound thealarm at thesame time every
day unless thealarm function is switched off.
• Thealarm is switched off by pressing [ SET ] therequired
number of times until thealarm time in question “A1”,
“A2” or “A3” is displayed.
• Press [ UP ] to toggle between −− (off) and ON (on).