Clas Ohlson 922265 - Time memory; Care and maintenance

12 13
English
Time memory
Theclock has abuilt-in memory for thetime and date.
Thememory is powered by afactory-installed CR2032
battery which can be replaced if theclock no longer saves
thetime after thepower source has been disconnected.
1. Replace thebattery by unscrewing theinner battery
cover (11).
2. Remove thecover and change thebattery.
3. Refit thebattery cover and secure it with thescrew.
Care and maintenance
Clean theproduct using alightly moistened cloth.
Use only mild cleaning agents, never solvents or
corrosive chemicals.