EasyManuals Logo

Clas Ohlson CK207 User Manual

Clas Ohlson CK207
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
English
GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk
1 2 3 4 5 6 7 8
9
10
11
Ver. 20160504
Bluetooth Speaker
Art.no 38-7648 Model CK207
Please read theentire instruction manual before using theproduct
and then save it for future reference. We reserve theright for any
errors in text or images and any necessary changes made to
technicaldata. In theevent of technical problems or other queries,
please contact our Customer Services.
Safety
This speaker can be used by children aged from 8 years
and above if they have been given supervision or instruction
concerning use of theappliance in asafe way and if they
understand thehazards involved. Cleaning and user
maintenance shall not be made by children unless they are older
than 8 and supervised. Keep thespeaker and its charger lead
out of reach of children under theage of 8.
Thespeaker may be used by persons with reduced physical,
sensory or mental capability, lack of experience or knowledge
which could jeopardise their safety, provided they have been
instructed in thesafe use of theproduct and understand
thehazards involved. Never let children play with thespeaker.
Thespeaker should not be taken apart or modified. Never try to
open thecasing of thespeaker. Thecasing houses dangerous
current-carrying non-insulated components. Contact with these
can lead to fire or electric shock.
Do not cover thespeaker. Adequate ventilation, with adistance
of at least 5cm between thespeaker and surrounding surfaces,
is necessary to prevent thespeaker from overheating.
Place thespeaker on astable, flat surface.
Do not place thespeaker where it could fall into water or other liquids.
Do not place thespeaker in constant sunlight or near naked
flames such as wood stoves, lit candles, etc.
Never subject thespeaker to high temperatures, damp or dusty
environments, heavy vibrations or impacts.
Protect your hearing. Listening on high volume for prolonged
periods can lead to permanent hearing loss.
Thespeaker must only be repaired by qualified service technicians.
Buttons and functions
9. Micro USB chargeport
10. 3.5mm aux input socket
11. MicroSD cardslot
3. Thespeaker will appear on your device as CK207, select it and
pair it with your device. Thespeaker will emit avoice message
and themode indicator will change to asteady blue light to
indicate that thedevice has been paired.
4. Start playback on theBluetooth device. Thevolume level
and track can be changed on either thespeaker or on your
external device. Otherplayback settings can be controlled from
theexternal device.
5. If theBluetooth connection is broken or if you wish to pair
thespeaker with adifferent Bluetooth device, hold in [ ] for
3seconds until themode indicator flashesblue.
6. Pair thenew device as explainedabove.
Note: Ifyou are prompted to enter aPIN code on your Bluetooth
device, enter 0000 (four zeroes). Certain Bluetooth devices may also
require connection approval.
Connecting adevice via the3.5mm aux-in socket
1. Switch thespeakeron.
2. Connect a3.5 mm audio cable between your device and
theaux input (10) on thespeaker.
3. Start playback on thedevice.
4. Adjust thevolume level on thespeaker or theexternal device.
5. Press [ ll ] to temporarily switch thesoundoff. Playback will
continue on thedevice but will bemuted. Press [ ll ] again to
switch thesound backon.
Note: Thetrack can be changed using thebuttons on thespeaker
once theexternal device is connected via the3.5mm socket.
Playing content on amicroSDcard
1. Switch thespeakeron.
2. Insert amicroSD card into theslot (11). Playback will start
automatically.
Call management
If you receive acall whilst your phone is connected to thespeaker
via Bluetooth.
Press [
] once to answer thecall.
Press [ ] once again to end thecall.
Hold in [ ] for 3 seconds to reject thecall.
Press [ ] twice in quick succession to call thelast number
dialled on your phone (only works if your phone supports
thisfunction).
Care and maintenance
Thespeaker has anIPX6 rating (dust and water jet proof) which
means that it can be subjected to water jets from all angles.
Itis therefore suitable for use in therain and very wet or humid
conditions. Thespeaker is however, not completely waterproof
and should not be immersed in water or other liquid.
Clean thespeaker using alightly moistenedcloth. Useonly mild
cleaning agents, never solvents or corrosive chemicals.
If thespeaker is not to be used for along time, thebattery
should be fully charged on aregular basis (every second month)
to prolong its capacity.
Troubleshootingguide
TheBluetooth speaker
will not switchon.
Thebattery might beflat. Recharge
thebattery.
No sound when
theBluetooth device is
connected and played.
Check thevolume and play/pause
status on both theexternal device
and speaker.
Make sure that theBluetooth
connection has been properly
established.
Test file playback on theBluetooth
device first before connecting it to
thespeaker.
Try using anotherfile. Thefile may
be incompatible or damaged.
Make sure that no other wireless
devices are disrupting thecurrent
Bluetooth connection.
No sound from
theexternal device
connected via
the3.5mm aux-in
socket.
Check for sufficient volume level
on theconnected device and
thespeaker. Checktheplay/pause
button on theconnected device.
Check that thecable connecting
thedevice and thespeaker
is undamaged and securely
connected.
Test theplayback of thefile on
thedevice itself before connecting it
to thespeaker.
Try using anotherfile. Thefile may
be incompatible or damaged.
No sound when
playing files from
amicroSDcard.
Check thevolume.
Try using anotherfile. Thefile may
be incompatible or damaged.
Try thecard in another device to
make sure that itworks.
Responsible disposal
1. Battery status indicator
2. [
] Answer, end and reject anincomingcall
3. [ ] Hold in to lower thevolume, short presses will move you
backwards through theplaylist
4. Microphone
5. [ ll ] Play/pause
6. [ + ] Hold in to raise thevolume, short presses will advance you
through theplaylist
7. Mode indicator
8. [ M/
] Hold in to switch on/off, short press to selectmode
Operating instructions
On
Hold in [ M/ ] (8) until thebattery status indicator lights up and
thespeaker emits anaudible signal. Themode indicator will flash
blue which indicates that thespeaker is detectable for other
Bluetooth devices.
Off
Hold in [ M/ ] (8) until thebattery status indicator goesout.
Charging
1. Switch thespeakeroff.
2. Connect theincluded charger lead to thecharging port (9) on
thespeaker and to acomputer or other USB charger.
3. Thethree LEDs in thebattery status indicator (1) will flash when
thespeaker is charging and indicate thebattery status as
follows:
- When all 3 LEDs of thebattery status indicator are lit,
thebattery pack is fully charged.
- 2 LEDs lit means that thebattery is 2/3 charged.
- 1 LED lit means that thebattery is 1/3 charged.
- When none of theLEDs is lit, thebattery is very low and
must be recharged.
Thespeaker will emit anaudible signal repeatedly when
thebattery capacity is low until it finally shuts down automatically
when thebattery is fully discharged.
Thespeaker can be used while it is being charged but doing so
will cause thecharging process to take longer.
Mode indicator
Themode indicator (7) indicates as follows:
Flashing blue light – thespeaker is detectable for other
Bluetooth devices.
Steady blue light – aBluetooth device is connected.
Steady red light – external device connected to the3.5mm
socket (10).
Steady purple light – there is amicroSD card in thecard slot (11).
Note: Ifthecard is empty and has no files on it thememory card
play mode will not be activated.
Pairing thespeaker to aBluetooth device
1. Hold in [ M/ ] (8) until thebattery status indicator lights up and
thespeaker emits anaudible signal. Themode indicator will
flash blue which indicates that thespeaker is detectable for
other Bluetooth devices.
2. Activate Bluetooth on thedevice to be paired with thespeaker.
This symbol indicates that this product should not
be disposed of with general householdwaste.
Thisapplies throughout theentire EU. Inorder to
prevent any harm to theenvironment or health
hazards caused by incorrect waste disposal,
theproduct must be handed in for recycling so that
thematerial can be disposed of in aresponsible
manner. Whenrecycling your product, take it to
your local collection facility or contact theplace
of purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specifications
Bluetooth version V4.0
Output 2×3W
Speaker 4Ω, 3W
Built-in battery 2200mAh lithium
Range Approx. 10m
Protectionclass IPX6
Size 148×69×52mm
Weight 350g

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clas Ohlson CK207 and is the answer not in the manual?

Clas Ohlson CK207 Specifications

General IconGeneral
BrandClas Ohlson
ModelCK207
CategorySpeakers
LanguageEnglish

Related product manuals