EasyManua.ls Logo

Clas Ohlson LT3011A - 9 Responsible Disposal; 10 Specifications

Clas Ohlson LT3011A
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
English
9. Responsible disposal
This symbol indicates that this product should not be disposed of
with general householdwaste. Thisapplies throughout theentire
EU. Inorder to prevent any harm to theenvironment or health
hazards caused by incorrect waste disposal, theproduct must be
handed in for recycling so that thematerial can be disposed of in
aresponsible manner. Whenrecycling your product, take it to your
local collection facility or contact theplace of purchase. Theywill
ensure that theproduct is disposed of in anenvironmentally sound manner.
10. Specifications
Material ABS plastic
Channels 2 channels
Power supply 4×AAA/LR03 batteries
Waveform Two phases square wave
Pulse length 30–350 μs
Pulse frequency 1–290 Hz
Treatment duration 5–90 minutes
Intensity Adjustable from 0 to 90 mA (at 1000 ohms)
Operating environment 5 to 40 ºC at 30–85% RH and
air pressure 700–1060 hPa
Storage and transport −10 to 50 ºC at 10–90% RH and
air pressure 700–1060 hPa
Dimensions 117×60×25 mm (without belt clip)
Weight 110 g (without batteries)
The electrode pads can be cleaned and reused 10–15 times. New batteries
will last for about two weeks if the product is used 30 min/day on program 1.
Warning: Read the entire User Guide before use.
Unit type BF.
The product must be handled in accordance with decree 2012/19/EU–WEEE
(Waste Electrical and Electronic Equipment).
CE 0197
The product is in conformity with the guidelines set down in the European
Medical Device Directive (93/42/EEC) and as amended by Directive 2007/47/EC.
Notified Body TÜV Rheinland (CE0197).
The product conforms to the requirements set out in the following
European standards: EN 60601-1, EN 60601-1-2, EN 60601-2-10,
ISO10993-5, ISO10993-10

Table of Contents