Clas Ohlson WS2068HL+WT450H User Manual

12
2
3
4
1
OUT
1
5
3
4
2
4
1
OUT
1
E N G L I S H
6. Setting the outdoor humidity alarm
Press [Mode]vetimesdirectlyaftersetting1.
1. “Setvalue”willashnextto“Indoor”.
2. Press [Alarm / Channel]
to select the desired channel (1 – 4).
3. Press and hold
[Snooze] to change between different settings: High humidity
alarm (

), low humidity alarm (

) or deactivated alarm ( ).
4. Press [Select °C / °F/-]
or [Max/Min+] to set the desired alarm value.
5. Conrmbypressing [Mode]
.
Helpful suggestions
When the indoor/outdoor temperature/humidity alarm sounds, the symbol
indicating that the alarm is activated (

) (

)willash.
• Press any of the buttons to deactivate the alarm.
• If none of the buttons is pressed, the buzzer will automatically stop after 1
minute. The buzzer will be activated again after 5 minutes.
• When the temperature/humidity alarm is activated a different buzzer sound
than that of “Alarm 1” and “Alarm 2” will sound.

Clas Ohlson WS2068HL+WT450H Specifications

General

Brand	Clas Ohlson
Model	WS2068HL+WT450H
Category	Weather Station
Language	English