What to do if my Classeq Washer glasses have white spots?
White spots on glasses may be due to an oily film from towel drying. Other causes include poor rinse pressure, or insufficient/poor quality rinse aid or detergent. Avoid towel drying glasses. Check the rinse pressure (a booster pump might be needed) and verify the rinse aid and detergent quality and dosing rates.
Why are my Classeq Washer glasses dirty after washing?
Dirty glasses can result from a dirty machine, so clean it regularly. Other causes include not pre-washing items, using poor quality or damaged glasses, or insufficient/poor quality rinse aid and detergent. Consider renovating or replacing glasses if they are damaged, and check your chemical and dosing rates.
How to prevent etching on Classeq Washer glasses?
Etching on glasses can be caused by high temperatures or aggressive chemicals. To address this, adjust the temperatures and consider changing the chemicals or their dosage rates.
General| Machine Type | Pass Through Dishwasher |
|---|---|
| Rack Size | 500 x 500 mm |
| Programs | 3 |
| Cycle Time | 120 minutes |
| Wash Cycle Duration | 120 minutes |
Safety warnings about serious or fatal injuries.
Safety warnings about minor injuries or material damage.
Warnings about product defects or destruction.
Identifies and explains the main components of the warewasher.
Details the control panel and its functions.
Lists and illustrates items included with the warewasher.
Provides technical specifications and dimensions for different models.
Instructions for installing the machine's adjustable feet.
Guidance on rerouting the drain hose during installation.
Instructions for electrical safety bonding of the warewasher.
Details on connecting the warewasher to the electrical supply.
Information on connecting the water supply to the warewasher.
Instructions for connecting the waste water outlet.
Lists essential tools for installing the warewasher.
Guidance on positioning the warewasher for optimal installation.
Detailed steps for electrical connections and safety.
How to connect the water supply hose correctly.
Proper procedures for waste water drainage connection.
Instructions for installing detergent and rinse aid bottles.
Overview of the control panel during commissioning.
How to enter and navigate the commissioning menu.
Adjusting rinse aid and detergent settings.
Steps to prime chemical pumps for initial use.
Instructions for commissioning the water softener unit.
Information on pre-set tank temperatures.
Identifies controls on the user interface for operation.
Steps to power on the warewasher.
Indicators and conditions for readiness to start a cycle.
How to switch between Celsius and Fahrenheit displays.
How to choose different wash cycle programs.
Guidelines for correctly loading items into the basket.
Step-by-step process to initiate a wash cycle.
Procedures for draining the warewasher at the end of the day.
Safety precautions before starting cleaning procedures.
Routine cleaning recommendations for daily hygiene.
Information on preventing and dealing with lime scale build-up.
Ongoing maintenance tasks for the warewasher.
Instructions for de-scaling the wash tank.
Steps to diagnose and resolve filling issues.
Steps to diagnose and resolve power-on issues.
Steps to diagnose and resolve slow filling issues.
Steps to diagnose and resolve overfilling issues.
Steps to diagnose and resolve heating issues.
Steps to diagnose and resolve excessive foam issues.
Steps to diagnose and resolve cycle start issues.
Diagnosing cycles that take too long.
Diagnosing cycles that fail to rinse.
Diagnosing and resolving overflow issues.
Diagnosing and resolving issues with wash quality.
Diagnosing and resolving drainage issues.
Diagnosing and resolving issues where the unit won't turn off.
To Next Page
