User Guide| KB-702/KB-702GM/KB-802-GM-IM
l EN 55032, EN 55024, EN 60950-1, EN 50581
Maritime Certification
The regulatory model KB802GM bears the DNV-GL mark, indicating conformity with
DNVGL-CG-0339 Edition November 2016.
Location Classes:
The influence of the ambient environment on equipment depends upon the field of
application on board. Environmental testing therefore implies tests being directly
related to intended location on board as well as general tests, which are not directly
related to location. There are five location classes: Temperature, humidity,
vibration, enclosure and EMC. The allowed location of installation on board depends
on the maritime approved location class.
Regulatory model KB-802GM-IM is DNV-GL type approved for Temperature
Location Class A, Humidity Location Class A, Vibration Location Class A, EMC
Location Class A & B and Enclosure Location Class A.
Regulatory model KB-802GM-IM is allowed to be installed in the control room and
bridge. For more details please follow the Table 1 Location Class below.
Regulatory model KB-802GM-IM is not allowed to be installed in machinery spaces,
pump room, holds, rooms with no heating and open deck.
Encore Models with DNV Certification, for use in Industrial and Marine Applications
KB-802GM-IM
Temperature 0°C to +50°C
Humidity Relative humidity up to 96 %
Vibration
Frequency range: 2 –13.2 Hz,
Amplitude: 1.0 mm (peak value)
Page 7
To Next Page
Loading...
Need help?
General
