Clear-Com RS-602 - Page 12

8
RS-602/622 BELTPACK
Call Buttons, Channels A and B
When you press a channel’s call button, a call signal is
sent to all other stations on that channel. Pressing the
Call A button sends a call signal on channel A. Pressing
the Call B button sends a call signal on channel B.
A channel’s call light glows red to indicate both
outgoing and incoming call signals on the channel.
Figure 2: RS-602/622 Control Panel
4
CALL A
TALK A
TAL K B
CALL B




7PMVNF±DPOUSPMLOPCDIBOOFM"
7PMVNF±DPOUSPMLOPCDIBOOFM#
1PXFS±TUBUVTMJHIU
4FUVQJOGPSNBUJPOXJOEPX